Heavy Duty HD-Series Punches
RTT 42
Rhin-O-Tuff Table
Our new binding equipment table adusts from 25" to 44" (63cm-112cm) in seconds for sitting or standing while punching & binding.
RTT 42 Table

HD 6500

HD7000 Gear Box
What makes a Rhin-O-Tuff so Tuff ?  Answer: Heavy Duty Parts like the gear box shown here. Click on the gear box for a close up.

The HD-6500 is a 14 inch (356 mm) open-ended punch that features a two bolt EZ change slide out die system for changing punch patterns in two minutes or less. The 6500 was designed for the customer who may change dies less often. It also offers quick, easy set-up: easy pin pulls and pre-set paper stop positions.

The HD-6500 Has More Than 20 Interchangeable Dies Available. 12 Hole Patterns Are Standard. (Comes With Your Choice of a Standard Die).

With a full year's warranty on both the machine and the dies this is truly the most economical heavy duty punch available. Why consider any other punch when you can have the best for less? Punching capacity depends on the punch pattern being used. Rated up to 40 sheets or up to 80 pages of 20 pound (80gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. (15,000 to18,000 SPH)

For a complete feature by feature comparison with the competition click here: Comparison

 

Quick Change Die System
Patented Two Bolt Die &
Die Pin Retainer Systems
HD 7000

The HD-7000 is a 14 inch (356 mm) open-ended punch that features the patented "quick change" die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The 7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a full year's warranty on both machine and the dies, this is truly the industry standard. You need look no further for the best.

The HD-7000 Has More Than 20 Interchangeable Dies Available. 12 Hole Patterns Are Standard. (Comes With Your Choice of a Standard Die).

Punching capacity depends on the punch pattern being used. Rated up to 40 sheets or up to 80 pages of 20 pound (80gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. (15,000 to18,000 SPH)

For a complete feature by feature comparison with the competition click here: Comparison

 
HD7000 Gear Box
What makes a Rhin-O-Tuff so Tuff ?  Answer: Heavy Duty Parts like the gear box shown here. Click on the gear box for a close up.

Quick Change Die System
Patented "Quick Change" Die &
Die Pin Retainer Systems
HD 7700

The HD-7700 Ultima is an exceptional Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System with the following exciting new features:

  • 14" ( 356mm ) open ended extra capacity die:
    Punch up to 55 sheets or 110 pages of 11 inch, 20 lb or 80gsm bond paper.
  • U-View waste tray:
    Holds up to 150% more waste than any other table top punch & eliminates troublesome overfills.
  • The Accu-Set Paper Stop:
    Set-up all hole placements easily & accurately, even on odd sized paper.
  • Diagnostic Display Lights:
    Give indications of important machine conditions.
  • Built in Automatic and Manual Reverse:
    Providing extra insurance to eliminate costly down time & expensive service calls due to overload jams.

With these new features plus all of the standard features you have come to expect from a Rhino, this Performance Design Punch will handle any size project, large or small.

As with all Rhin-O-Tuff's the HD-7700 comes with a 1 year limited warranty on both machine & die.

For a complete feature by feature comparison with the competition click here: Comparison

 

Back to Top